whatman囊式組織培養溶液過濾器

whatman囊式組織培養溶液過濾器 的詳細介紹Whatman Polycap 
一囊式組織培養溶液過濾器可以安全而有效地過濾要求嚴格的生物溶液和組織培養溶液。whatman囊式組織培養溶液過濾器 
特性：
·具有低蛋白吸附膜
·高效預濾
·預先滅菌
·不要求任何昂貴的設備
·比常規方法降低了噴濺和泄露的危險
·可用一個濾器作為另一個濾器的預濾裝置
·可將樣品直接過濾到常壓容器中

Polycap? TC (PES) is available with and without a filling bell, they are 
disposable, dual layer polyethersulfone (PES) membrane filtration capsules that 
provide efficient filtration for critical aqueous solutions.
The PES membrane is inherently hydrophilic, has low extractables, is biosafe, 
has excellent flow rates and exhibits low protein binding.
Features and benefits 
  Polycap TC/PES 0.2/0.1, 0.2/0.2 and 0.8/0.2 μm capsules pass the HIMA 
  Challenge Test for Sterilizing Grade Filters
  100% integrity-tested during manufacturing; results are correlated to 
  microbial retention
  Housing thermally fused (no surfactants or mold releasing agents)
  Integrity-testable by bubble point, pressure decay or forward flow methods
  Available in sterile and nonsterile versions with a filling bell option
  Manufactured in clean room facilities under ISO Quality Systems
  PES membrane protein adsorption characteristics:
  HSA 0.4 μg/cm2
  Insulin 2.0 μg/cm2 
  Gammaglobulin 1.5 μg/cm2

Applications 
  Aqueous solutions
  Biologicals
  Buffers
  Cleaning/rinsing solutions
  Enzymes
  High-quality water
  Particle counting solutions
  Pharmaceutical solutions
  Reagent preparation
  Salt solutions
  Tissue culture media
  Virus suspensions
 
      Technical Properties - Polycap TC 
      HousingPolypropylene 
      VentOn inlet 
      MembranePolyethersulfone (PES) 
      Support systemPolypropylene 
      SealingHeat-fused 
      Maximum pressure4.1 bar (60 psi)
      Flow directionIf there is a prefilter, it is located on the inlet side and 
      flow should follow arrows
      Endotoxin levelLAL tested, ≤  0.5 EU/ml 
      BiosafetyMaterials pass USP Class VI 
      SterilizationCertain filter devices have been sterilized.* 
      Capsule may be autoclaved at 121°C for 20 minutes (maximum 132°C). 
      However, an integrity test should be performed after autoclaving. 
      (*sterile and non-sterile options offered)
      Filtration area36 mm capsule: 440 cm2 (72 in2)
      75 mm capsule: 930 cm2 (144 in2)
      150 mm capsule: 1900 cm2 (302 in2)
      Water bubble point (final membrane)0.1 μm > 3.2 bar (46 psi) 
      0.2 μm > 2.7 bar (40 psi) 
      0.45 μm > 2.1 bar (30 psi)
      1.0 μm > 1.1 bar (16 psi)
      SB - Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
      1/2 SB - Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing
      MNPT - Male national pipe thread
      HB - Hose barb

      Ordering Information - Polycap TC
      Catalog NumberDescription
      6714-3601Polycap TC 36, 0.2/0.1 μm, sterile, with SB inlet and outlet, 
1/pk
      6714-3602Polycap TC 36, 0.2/0.2 μm, sterile, with SB inlet and out, 
1/pk
      6717-3602Polycap TC 36, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet, 
      1/pk 
      2622NSPolycap TC 36, 0.2/0.2 μm, with HB inlet and SB outlet, 5/pk
      6714-3604Polycap TC 36, 0.65/0.45 μm, sterile, with SB inlet and out, 
      1/pk
      6715-3601Polycap TC 36, 0.2/0.1 μm, sterile, with SB inlet and outlet plus 
      filling bell, 1/pk
      6715-3602Polycap TC 36, 0.2/0.2 μm, sterile, with SB inlet and outlet plus 
      filling bell, 1/pk
      6716-3612Polycap TC 36, 0.2/0.2 μm, with 1/2 SB inlet and SB outlet plus 
      filling bell, 1/pk 
      6716-3602Polycap TC 36, 0.2/0.2 μm, with MNPT inlet and SB outlet plus 
      filling bell, 1/pk 
      6715-3604Polycap TC 36, 0.65/0.45 μm, sterile, with SB inlet and outlet 
      plus filling bell, 1/pk
      6715-3682Polycap TC 36, 0.8/0.2 μm, sterile, with SB inlet and outlet plus 
      filling bell, 1/pk
      6714-7501Polycap TC 75, 0.2/0.1 μm, sterile, with SB inlet and outlet, 
1/pk
      6714-7502Polycap TC 75, 0.2/0.2 μm, sterile, with SB inlet and outlet, 
1/pk
      2742CPolycap TC 75, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet, 
5/pk
      2742MPolycap TC 75, 0.2 μm, with MNPT inlet and outlet, 5/pk
      6717-7504Polycap TC 75, 0.65/0.45 μm, sterile, with 1/2 SB inlet and 
      outlet, 1/pk 
      6714-7504Polycap TC 75, 0.65/0.45 μm, sterile, with SB inlet and outlet, 
      1/pk 
      6717-7510Polycap TC 75, 1.0/1.0 μm, sterile, with 1/2 SB inlet and outlet, 
      1/pk
      6715-7501Polycap TC 75, 0.2/0.1 μm, sterile, with SB inlet and outlet plus 
      filling bell, 1/pk
      6715-7502Polycap TC 75, 0.2/0.2 μm, sterile, with SB inlet and outlet plus 
      filling bell, 1/pk
      6716-7502Polycap TC 75, 0.2/0.2 μm, sterile, with MNPT inlet and SB outlet 
      plus filling bell, 1/pk
      6718-7504Polycap TC 75, 0.65/0.45 μm, with 1/2 SB inlet and SB outlet plus 
      filling bell, 1/pk
      6715-7582Polycap TC 75, 0.8/0.2 μm, sterile, with SB inlet and outlet plus 
      filling bell, 1/pk
      6717-9501Polycap TC 150, 0.2/0.1 μm, sterile, with 1/2 SB inlet and 
      outlet, 1/pk
      6717-9502Polycap TC 150, 0.2/0.2 μm, sterile, with 1/2 SB inlet and 
      outlet, 1/pk
      6704-9502Polycap TC 150, 0.2/0.2 μm, with 1 1/2" sanitary inlet and 
      outlet, 1/pk
      6717-9504Polycap TC 150, 0.65/0.45 μm, sterile, with 1/2 SB inlet and 
      outlet, 1/pk
      6717-9510Polycap TC 150, 1.0/1.0 μm, sterile, with 1/2 SB inlet and 
      outlet, 1/pk
      6718-9502Polycap TC 150, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet 
      plus filling bell, 1/pk
      6718-9582Polycap TC 150, 0.8/0.2 μm, sterile, with 1/2 SB inlet and outlet 

whatman濾膜層析產品一級代 理(二)

            WHATMAN薄層層析板TLC 
            WHATMAN尼龍膜 
            WHATMAN空氣檢測用濾膜PM2.5 PM10 
            3MM色譜紙31ET色譜紙3MM濾紙 
            WHATMAN囊式過濾器 
            WHATMAN硝酸纖維素膜NC膜 
            WHATMAN PVDF膜 
            WHATMAN PURADISC25針頭式過濾器 
            WHATMAN盤式過濾器 
            WHATMAN基因組純化試劑盒 
            FTA卡 
            全不銹鋼真空過濾器 
            Partisil HPLC Columns 色譜柱